Multi-Color Polyjet

Material Jetting

Material info

关于 Multi-Color Polyjet

Multi-Color Polyjet is a rigid plastic material printed on the Stratasys J750 printer. The printer uses Polyjet technology to print in multiple Vero materials, including a clear plastic, to achieve 500,000 color combinations for translucent or opaque, full-color products. Multi-Color Polyjet is great for durable and realistic visual prototypes, medical models, and displays.

If interested in using this material reach out to our 销售团队

Color & 完成

技术

  • Material Jetting

Material Properties

Tensile Strength (ASTM D-638-03)
50 - 65 MPa
Elongation at Break (ASTM D-638-05)
10-25%
Modulus of Elasticity (ASTM D-638-04)
2000-3000 MPa
热变形@ 0.45 MPa (ASTM D-648-06)
45-50 °C

描述

Material Highlights
full color, durable, good details

Design Guidelines

Bounding Box

Bounding Box 马克斯
490 × 390 × 200 mm

Bounding Box 最小值
2.5 × 2.5 × 2.5 mm

The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.

支持ed Wall Thickness 最小值
1.0 mm
Unsupported Wall Thickness 最小值
1.0 mm
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall. 墙 that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model. Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.

电线

支持ed 电线 最小值
1.0 mm
Unsupported 电线 最小值
1.0 mm
A wire is a circular, rectangular or even triangular feature that is thinner in its unconnected directions than its length. A supported wire is connected at least on two sides of the model, while an unsupported wire is connected on one side of the model. 电线 that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wire geometry of the model. Please consider the size of your model and reinforce the wires or add support structures as needed as minimum guidelines will not always be adequate for large models.

Details

Details 最小值 Embossed
0.5毫米高 & 宽
Details 最小值 Engraved
0.5毫米深 & 宽
用于文本, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.

Escape Holes

间隙

最小值
0.4 mm
间隙 is the space between two individual parts in a model. If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean. This is important for movable pieces like hinges, gears, etc.

Interlocking & 随信附上 Parts

Interlocking
是的

随信附上
是的

Parts in File

马克斯
是的. 100

Related 材料

Also Known As Frosted Detail Plastic, Resin-based Acrylic Plastic, Photopolymer, VisiJet M3 Crystal
Fine Detail Plastic
应用程序: Scale Models, 最小值iatures, 珠宝 Prototypes, Mold Masters
了解更多→
Mimaki Full Color Photopolymer
High Definition Full Color
应用程序: Figurines, 医疗 Models, Architecture, Terrain Models, Realistic Visual Prototypes
了解更多→

Stay up to date on promotions, case studies, and more.

友情链接: 1 2 3 4 5 6 7 8 9 10