铑镀铜

蜡铸造

材料信息

关于 铑镀铜

铑镀铜 offers a shiny, mirror-like finish that is popular for both Men and Women’s jewelry. It’s capable of showcasing intricate details and offers a professional, finished look and feel. 电镀是0.25 microns thick which is perfect for occasional wear. For jewelry for everyday wear, we recommend trying 银.

Color & 完成

技术

  • 蜡铸造

描述

材料了
高质量的 & professional finishing, capable of intricate details, great value
处理和护理
Precious Plated Metal is a durable material, but can still scratch or wear through. Prolonged surface wear can rub off the finish. 为了防止损坏, we recommend storing your item in a soft cloth pouch away from other products, and avoiding exposure to household chemicals and cleaning products.

设计指导方针

边界框

边界框马克斯
89 × 89 × 100 mm

边界框最小
2.4 × 2.4 × 0.6 mm

The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.

支持ed Wall Thickness 最小值
0.8 mm
Unsupported Wall Thickness 最小值
0.8 mm
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall. 墙 that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model. Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.

电线

支持线分
0.8 mm
不支持的电线敏
0.8 mm
金属丝是圆形的, rectangular or even triangular feature that is thinner in its unconnected directions than its length. A supported wire is connected at least on two sides of the model, while an unsupported wire is connected on one side of the model. 电线 that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wire geometry of the model. Please consider the size of your model and reinforce the wires or add support structures as needed as minimum guidelines will not always be adequate for large models.

Details

分钟浮雕细节
0.4毫米高 & 宽
最小细节雕刻
0.35毫米高 & 宽
用于文本, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.

逃离黑洞

Single Escape Hole Diameter (最小值)
4.0 mm
Multiple Escape Hole Diameter (最小值)
2.0 mm
Escape holes are necessary to empty the support material of a hollow model. Two escape holes at the opposite ends of the model is optimal for the support removal process. Please consider the size of your model and make the escape holes bigger or add more escape holes as needed as minimum guidelines will not always be adequate for large models.
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.

间隙

最小值
0.3 mm
间隙 is the space between two individual parts in a model. If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean. This is important for movable pieces like hinges, gears, etc.

联锁 & 封闭的部分

联锁
No

随信附上
No

部分文件

马克斯
Up to 2 identical parts (like earrings or cufflinks) may be uploaded in the same model file. We cannot accept multiple, 独特的, non-interlocking parts ordered in the same model file; there should be one file for each 独特的 part.

精度

精度 Your model may shrink about 0.25mm + 2.5% after casting and finishing. For rings the inner diameter is accurate within +/- 0.1 to 0.15mm. On average, the model shrinks about 2.5% after casting and finishing. We do our best to polish the internal diameter to match your model file.
For example: a product with dimensions of 50 x 50 x 100 mm can be 0.25 mm + 0.025*100 mm = 0.5 mm smaller in any direction.

相关材料

925纯银
应用程序: Women's and Men's 珠宝 including Bracelets, Pendants, Rings, Cufflinks, and Tie Bars
了解更多→
铜-Tin Alloy (90% 铜, 10% Tin)
青铜
应用程序: 珠宝, Fashion Accessories, 首页 Decor, Prototypes, 最小值iatures
了解更多→

Stay up to date on promotions, case studies, and more.

友情链接: 1 2 3 4 5 6 7 8 9 10